Mon-Fri 8am-9pm. Sat-Sun 9.30am-5pm

Call Now 0800 032 7242

Soffit installers, UPVC Soffits, Tongue & Groove soffit,

  • light oak tongue and groove soffit fascia division
  • UPVC white plain soffits fascia division southampton
  • Rosewood fascia board white tongue groove soffits fascia division southampton
  • white fascias soffits square guttering fascia division southampton
  • Black ash tongue and groove soffit fascia division southampton

Soffit boards

We offer a complete range of soffit boards which perfectly complement our fascia boards. These high-quality components give your roofline an attractive, clean-edged finish and require minimal maintenance. There are three soffit styles available, (flat soffit, tongue and groove, pre-vented soffit) all of which are fully compatible with our fascia systems for an exact colour-match.

Installation of Plain Soffits

Installation of Tongue and Groove Soffits

Standard UPVC Colour Guide

  • White

  • Rosewood

  • Black Ash

  • Irish Oak

  • Light Oak

  • White Ash

  • Grey

  • Cream

  • * Ral Colour

*UPVC colour coating

Our products can be colour matched to any RAL Colour. We also offer a colour matching service.

Our paint adheres with the surface to form a permanently bonded coating, it is touch dry in two minutes and cures in 24 hours to form a highly durable finish that will not crack, flake or peel, it even remains sufficiently flexible to bend with the UPVC or Aluminium it is bonded to.

  • Virtually fade free:
  • Tested waterproof for ten years:
  • 10 year guarantee on adhesion:
  • Available in any RAL colour:
  • Colour matching service also available:

White Soffit

Our UPVC white ‘Smooth traditional flat’ Soffit boards are very popular. Being perhaps the easiest to keep clean, the White Soffit is perhaps the most commonly used profile due to the colour being able to either match perfectly with our White Fascia boards or contrast where required with our range of woodgrain or coloured profiles.

A comprehensive 20 year guarantee covering all eventualities such as discolouration, warping, fading and cracking gives total peace of mind. Available in widths of up to 600mm wide and 5 meters long our White Soffit range can lend itself to a wide variety of design possibilities.

Other options can include combining it with our tongue and groove soffits where depths exceed 600mm. This method due to the 10mm thickness being the same as our tongue and groove soffits can allow for a ‘secretly fixed’ look without the need for additional panel joining trims.

Plain Soffits Gallery Tongue and Groove Soffits Gallery
UPVC White Fascias and Soffits, UPVC White Ogee Guttering
UPVC White Fascias and Soffits, UPVC White Ogee Guttering
UPVC White Ogee Fascia and Tongue and Groove Soffit, UPVC Black Deep Round Guttering
White Ogee Fascia, White Tongue and Groove Soffit, UPVC Black Deep Round Guttering

White Tongue and Groove Soffit

Our UPVC White Tongue and groove soffits are possibly the most versatile of them all. The choice of running the soffit either ‘long ways’ or ‘short ways’ can give a bespoke look to any roofline. The interlocking boards slot together neatly to hide any fixings to provide an attractive appearance and when used ‘short ways’ (at 90 degrees to the wall) can extend up to a 5 meter projection without needing any panel joint trims!

‘Tongue and groove’ soffit, in our opinion, offers an ideal solution particularly in applications where the soffit varies in width or runs are in excess of 5 meters long. When used ‘short ways’ it means that entire runs can be fitted without surface trims being applied giving a tidy ‘tailored’ finish.

Again a 20 year product guarantee provides ultimate peace of mind. Only the occasional wipe over with warm soapy water or mild detergent is required to keep it looking ‘as new as the day it was fitted’.

When coupled with our range of starter trims ‘that we fit as standard’ up against the brick work it gives a clean crisp finish without the need for unsightly silicones or mastic. A great product and economically priced as well.

Plain Soffits Gallery Tongue and Groove Soffits Gallery

Rosewood Soffit

We offer a comprehensive range of UPVC Rosewood ‘smooth traditional flat’ soffit boards that ideally complement our range of Rosewood Fascias.

As with our UPVC Rosewood Fascias, our range of Soffits come with a 10 year product guarantee to include colour fastness and provide a long term solution in a variety of applications.

Options on fitting can include combining ‘plain’ Rosewood Soffits with our ‘Tongue and Groove’ range of Rosewood soffits to allow for areas of the roofline where the soffit has a much wider projection (i.e. over porches above entrance doors).

Our standard range allow for soffit widths up to 450mm by 5 meters long however we do have options where this can increased to 600mm in certain circumstances, please ask for details.

Plain Soffits Gallery Tongue and Groove Soffits Gallery
UPVC Rosewood Fascia and Soffit, UPVC Brown Ogee Guttering
UPVC Rosewood Fascia and Soffit, UPVC Brown Ogee Guttering
UPVC Rosewood Fascia and Tongue and Groove Soffit, UPVC Brown Ogee Guttering
UPVC Rosewood Fascia and Rosewood Tongue and Groove Soffit, UPVC Brown Ogee Guttering

Rosewood Tongue and Groove Soffit

Our UPVC Rosewood Tongue and Groove Soffits are the most popular choice with our Rosewood Fascia range. Each board interlocks with the next whilst hiding the fixings needed to secure it to your roofline.

We fit Rosewood edging trim as standard up against the brickwork to provide neat and attractive finish.

The Rosewood ‘tongue and groove soffit system can be fitted in either direction (short ways or long ways) depending on the finish required. When fitted ‘shortways’ it can ‘interlock’ around the entire building without the need for surface fitted joint trims. This is probably the neatest way to ‘trim off’ the roofline and due to the products versatility it can be applied to almost every application. This means that even if the soffit is particularly wide, for example, over a bay window or a porch then our tongue and groove soffits are perhaps the best suited as a made to measure look is easily afforded.

All of our Rosewood product range comes with a minimum 10 year product guarantee for complete peace of mind.

Plain Soffits Gallery Tongue and Groove Soffits Gallery

Black Ash Soffit

Our Black Ash ‘Smooth traditional flat’ Soffits are an attractive solution for the roofline that match our Black Ash Fascias perfectly.

Available in sizes from 100mm to 450mm they come in 5 meter lengths with matching discreet panel joint trims to join longer lengths. Our Flat soffits are compatible with our tongue and groove Black Ash Soffits for areas that have a larger projection. (i.e porch entrances, bay windows or larger roof overhangs).

Our Black Ash UPVC range of profiles come with a Ten Year Product guarantee for peace of mind and come with a range of colour matched trims (i.e where the soffits meet UPVC windows).

We always fit our UPVC Black ash edging trim where the Soffit meets the brickwork to provide a neat and tidy finish which avoids the use of unsightly silicone sealants.

As with all of our Woodgrain products the Black Ash Colour range is laminated with a uniformed Black Ash foil that is a perfect colour match for Black Ash UPVC Windows etc to keep the exterior joinery uniform throughout.

Plain Soffits Gallery Tongue and Groove Soffits Gallery
UPVC Black Ash Fascia and Soffit, UPVC Black Square Guttering
UPVC Black Ash Fascia and Soffit, UPVC Black Square Guttering
UPVC Black Ash Fascia and Black Ash Tongue and Groove Soffit with Seamless Black Ogee Guttering
UPVC Black Ash Fascia and Black Ash Tongue and Groove Soffit, Seamless Black Ogee Guttering

Black Ash Tongue and Groove Soffit

Our UPVC Black Ash Woodgrain Tongue and Groove Soffits are extremely popular with our Black Ash Fascia range.

This tongue and groove option has interlocking boards which neatly hide away the fixings required for fitment.

A choice of fitting the soffits lengthways or ‘short ways’ allows for a variety of finished appearances to either ‘retain an existing look’ or even make improvements to the overall look of the roofline. With fitting the tongue and groove soffit ‘short ways’ this method allows the soffits to be projected to any length (up to 5 meters) without any visible fixings or panel joins required. It can also dramatically enhance the look of this ‘highly visible’ area of the roofline when compared to ply boards with gaps at each join!

As with all of our Woodgrain profiles our Black Ash Tongue and Groove Soffits come with a 10 Year Product Guarantee as standard to include colour fastness!

Plain Soffits Gallery Tongue and Groove Soffits Gallery

Mahogany Soffit

We offer a comprehensive range of UPVC Mahogany ‘smooth traditional flat’ soffit boards that ideally complement our range of Rosewood Fascias.

As with our UPVC Mahogany Fascias, our range of Soffits come with a 10 year product guarantee to include colour fastness and provide a long term solution in a variety of applications.
Options on fitting can include combining ‘plain’ Mahogany Soffits with our ‘Tongue and Groove’ range of Mahogany soffits to allow for areas of the roofline where the soffit has a much wider projection (i.e. over porches above entrance doors).

Our standard range allow for soffit widths up to 450mm by 5 meters long however we do have options where this can increased to 600mm in certain circumstances, please ask for details.

Plain Soffits Gallery Tongue and Groove Soffits Gallery
UPVC Mahogany Fascia, Mahogany Soffit, UPVC Black round Guttering
UPVC Mahogany Fascia, Mahogany Soffit, UPVC Black round Guttering
UPVC Mahogany Fascia, Mahogany Tongue and Groove Soffit, UPVC Brown Deep Round Guttering
UPVC Mahogany Fascia, Mahogany Tongue and Groove Soffit, UPVC Brown Deep Round Guttering

Mahogany Tongue and Groove Soffit

Our UPVC Mahogany Tongue and groove soffits are possibly the most versatile of them all. The choice of running the soffit either ‘long ways’ or ‘short ways’ can give a bespoke look to any roofline. The interlocking boards slot together neatly to hide any fixings to provide an attractive appearance and when used ‘short ways’ (at 90 degrees to the wall) can extend up to a 5 meter projection without needing any panel joint trims!

‘Tongue and groove’ soffit, in our opinion, offers an ideal solution particularly in applications where the soffit varies in width or runs are in excess of 5 meters long. When used ‘short ways’ it means that entire runs can be fitted without surface trims being applied giving a tidy ‘tailored’ finish.

Again a 10 year product guarantee provides ultimate peace of mind. Only the occasional wipe over with warm soapy water or mild detergent is required to keep it looking ‘as new as the day it was fitted’.

When coupled with our range of starter trims ‘that we fit as standard’ up against the brick work it gives a clean crisp finish without the need for unsightly silicones or mastic. A great product and priced economically with very little wastage.

Plain Soffits Gallery Tongue and Groove Soffits Gallery

Irish Oak Soffit

We offer a comprehensive range of UPVC Irish Oak‘smooth traditional flat’ soffit boards that ideally complement our range of Irish Oak Fascias.

As with our UPVC Irish Oak Fascias, our range of Soffits come with a 10 year product guarantee to include colour fastness and provide a long term solution in a variety of applications.
Options on fitting can include combining ‘plain’ Irish Oak Soffits with our ‘Tongue and Groove’ range of Irish Oak soffits to allow for areas of the roofline where the soffit has a much wider projection (i.e. over porches above entrance doors).

Our standard range allow for soffit widths up to 450mm by 5 meters long however we do have options where this can increased to 600mm in certain circumstances, please ask for details.

Plain Soffits Gallery Tongue and Groove Soffits Gallery
UPVC Irish Oak Fascia, UPVC Irish Oak Soffit and UPVC Caramel Ogee Guttering
UPVC Irish Oak Fascia, UPVC Irish Oak Soffit and UPVC Caramel Ogee Guttering
UPVC Irish Oak Fascia, Irish Oak Tongue and Groove Soffit, UPVC Caramel Ogee Guttering
UPVC Irish Oak Fascia, Irish Oak Tongue and Groove Soffit, UPVC Caramel Ogee Guttering

Irish Oak Tongue and Groove Soffit

Our UPVC Irish Oak Tongue and Groove Soffits are the most popular choice with our Irish Oak Fascia range. Each board interlocks with the next while hiding the fixings needed to secure it to your roofline.

We fit Irish Oak coloured edging trim as standard up against the brickwork to provide neat and attractive finish.

The Irish Oak ‘tongue and groove soffit system can be fitted in either direction (short ways or long ways) depending on the finish required. When fitted ‘shortways’ it can ‘interlock’ around the entire building without the need for surface fitted joint trims. This is probably the neatest way to ‘trim off’ the roofline and due to the products versatility it can be applied to almost every application. This means that even if the soffit is particularly wide, for example, over a bay window or a porch then our tongue and groove soffits are perhaps the best suited as a made to measure look is easily afforded.

All of our Irish Oak product range come with a minimum 10 year product guarantee for complete peace of mind.

Plain Soffits Gallery Tongue and Groove Soffits Gallery

Light Oak Soffit

Also known as ‘Golden Oak’ – We offer a comprehensive range of UPVC Light Oak ‘smooth traditional flat’ soffit boards that ideally complement our range of Light Oak Fascias.

As with our UPVC Light Oak Fascias, our range of Soffits come with a 10 year product guarantee to include colour fastness and provide a long term solution in a variety of applications.

Options on fitting can include combining ‘plain’ Light Oak Soffits with our ‘Tongue and Groove’ range of Light Oak soffits to allow for areas of the roofline where the soffit has a much wider projection (i.e. over porches above entrance doors).

Our standard range allow for soffit widths up to 450mm by 5 meters long however we do have options where this can increased to 600mm in certain circumstances, please ask for details.

Plain Soffits Gallery Tongue and Groove Soffits Gallery
UPVC Light Oak Fascias and Soffits, UPVC Caramel Ogee Guttering
UPVC Light Oak Fascias and Soffits, UPVC Caramel Ogee Guttering
UPVC Light Oak Tongue and Groove Soffit, UPVC Black Deep Round Guttering
UPVC Light Oak Tongue and Groove Soffit, UPVC Black Deep Round Guttering

Light Oak Tongue and Groove Soffit

Our UPVC Light Oak Tongue and Groove Soffits are the most popular choice with our Light Oak Fascia range. Each soffit board interlocks with the next whilst hiding the fixings needed to secure it to your roofline.

We fit Light Oak edging trim as standard up against the brickwork to provide a neat and attractive finish.

The Light Oak ‘tongue and groove soffit system can be fitted in either direction (short ways or long ways) depending on the finish required. When fitted ‘shortways’ it can ‘interlock’ around the entire building without the need for any surface fitted joint trims. This is probably the neatest way to ‘trim off’ the roofline and due to the products versatility it can be applied to almost every application. This means that even if the soffit is particularly wide, for example, over a bay window or a porch then our tongue and groove soffits are perhaps the best suited as a made to measure look is easily afforded.

All of our Light Oak product range come with a minimum 10 year product guarantee for complete peace of mind.

Plain Soffits Gallery Tongue and Groove Soffits Gallery

Copyright ©1990-2017 The Fascia Division. All rights reserved. Terms of use | Privacy Policy
Registered in England no. 4319372. VAT Reg no. 755097604. Registered Office: Factory 2, Phoenix Park Industrial Estate, Chickenhall Lane, Eastleigh, Hampshire, SO50 6PQ